Dimensions & structures · Java & Bedrock · Beginner

How to Reset Outer End Cities for Fresh Elytras While Keeping Your Main End Island

On long-running worlds or multiplayer servers, the End dimension quickly becomes picked clean of Elytras and Shulker shells as players raid every nearby End City. This guide shows you how to reset the outer End islands to regenerate brand-new cities while keeping your central dragon island, Endermen farms, and exit portal completely intact. You can do this safely in your browser using our Chunk Trimmer, which processes your files locally without ever uploading your world.

Open the Chunk TrimmerPaint chunks on the map and delete them, or remove every chunk nobody really visited.

What you need

  • Your Minecraft Java Edition world folder (or a .zip archive) or Bedrock Edition .mcworld / world folder
  • A full backup copy of your world saved in a safe location before editing
  • Coordinates of any outer-End builds you want to protect (press F3 in Java or enable Show Coordinates in Bedrock)

Step by step

  1. 1Evacuate the Outer End and Back Up Your World

    Before modifying any files, make sure all players travel back through the End portal to the Overworld or return to the central End island (near coordinates 0, 0). If a player logs out inside an outer End City that gets deleted, they may spawn in mid-air over the void when they rejoin. Once everyone is safe, close Minecraft completely and copy your entire world folder to your desktop as a backup.

    Tip: On multiplayer servers, completely stop the server before copying or editing world files so all chunks save properly.

  2. 2Open Your World in the Chunk Trimmer

    Launch the Chunk Trimmer on our site and click Open world folder or .zip (for Bedrock, you can also select an exported .mcworld file). Because our tools run entirely in your browser, your files are read directly from your drive and never upload to the internet. Once the world loads, look for the dimension selector and switch from the Overworld to The End (stored in the DIM1 folder in Java Edition or Dimension ID 2 in Bedrock).

  3. 3Protect the Central End Island Regions

    The central End island sits right around the world origin at X: 0, Z: 0, which means it touches four region zones: r.0.0.mca, r.-1.0.mca, r.0.-1.mca, and r.-1.-1.mca (from block -512 to +511 on both axes). The massive ring of empty void surrounding the main island extends out to roughly 1,000 blocks from the center. In the Chunk Trimmer, select the four central regions—Specifically r.0.0 and r.-1.-1 along with r.-1.0 and r.0.-1—and mark them as protected so your dragon arena, obsidian pillars, and End gateway portals are preserved.

    Tip: If you built an Enderman farm far out over the void, check its X and Z coordinates in-game and divide them by 512 (rounding down) to find which extra region you need to protect.

  4. 4Trim the Outer End Island Regions

    With your central island regions marked for protection, invert your selection or choose the option to trim all unselected regions outside the central box. Confirm the action in the Chunk Trimmer to wipe all outer island regions (and their matching entries in the entities and poi folders for Java 1.17+, or Bedrock LevelDB chunk keys). This completely removes the explored outer islands from your save file while leaving the center untouched.

  5. 5Save Changes and Replace Your World Files

    Click the save or download button in the Chunk Trimmer to export your updated world folder or modified dimension files. If you loaded your Java world folder directly in a supported browser, allow the tool to write the changes; if it downloads a .zip or .mcworld file, extract it and replace your original DIM1 folder (Java) or db folder (Bedrock). Load up Minecraft, throw an Ender Pearl through an End Gateway on the main island, and enjoy freshly generated End Cities with full chests and new Elytras.

How it works

Minecraft does not store an entire dimension in one giant file; instead, it divides the world into 16x16 block columns called chunks, and groups 32x32 chunks together into 512x512 block areas called regions. In Java Edition, the End dimension lives inside the DIM1 subfolder, where terrain is saved inDIM1/region/ as individual files named r.X.Z.mca. Since Java 1.17, mobs and item frames—including the item frame holding the Elytra inside an End Ship—are stored separately in DIM1/entities/ using the exact same r.X.Z.mca naming system.

Because the center of the End is located at coordinates (0, 0), the main dragon island spans across the intersection of four regions: r.0.0.mca (0 to 511), r.-1.-1.mca (-512 to -1), r.-1.0.mca, and r.0.-1.mca. Between roughly 200 blocks and 1,000 blocks out from (0, 0), the game generates nothing but empty void. The outer End islands only begin generating past the 1,000-block ring.

When our Chunk Trimmer deletes all region files and chunk records outside that central 4-region square, Minecraft simply forgets those outer areas were ever visited. The next time a player travels through an End Gateway or flies past the 1,000-block void ring, the game treats those coordinates as brand-new territory and runs its terrain generator again, creating untouched End Cities, Shulkers, and End Ships.

Common mistakes

  • Only deleting files in DIM1/region/ manually in Java 1.17 or newer without clearing DIM1/entities/ and DIM1/poi/, which causes brand-new End Cities to spawn with duplicate Shulkers or missing Elytra item frames. Using the Chunk Trimmer handles all matching folders automatically.
  • Protecting only r.0.0.mca while forgetting r.-1.-1.mca, r.-1.0.mca, and r.0.-1.mca. Because (0, 0) is a corner point where four regions meet, keeping only r.0.0 will slice away three-quarters of your main End island!
  • Forgetting about a void-based Enderman XP farm built at Y: 0 several hundred blocks away from the main island. Always check the farm's coordinates first; if it sits past block 511 or -512, you must protect its region too.
  • Leaving a player logged out inside an outer End City before trimming. When that player logs back in, the building underneath them will be gone (or replaced by solid End Stone if the world seed or game version changed).

FAQ

Will deleting the outer End regions break the End Gateway portals on the main island?

No. The small bedrock gateway portals floating around the main island are stored inside the central regions (within 100 blocks of 0, 0) and their teleport logic is saved in the main level.dat file. When you enter one after trimming, it will simply generate a new arrival platform on the freshly reset outer islands.

Do I need to fight the Ender Dragon again after doing this?

No. The dragon fight state, previously opened gateways, and the central exit portal are stored in level.dat and inside the central four regions that you protected.

Will the newly generated End Cities be in the exact same spots as before?

Yes, as long as you are playing on the same Minecraft version and haven't changed your world seed, the terrain generator will rebuild the same End Cities in the same locations—complete with fresh loot chests, Shulkers, and Elytras.

By using the Chunk Trimmer to keep the central four regions around (0, 0) while wiping all outer regions in the End dimension, you can safely regenerate every End City and Elytra without losing your main island or dragon arena.

More dimensions & structures guides

Dimensions & structuresHow to Find Exact Structure Bounding Boxes (Fortresses, Witch Huts, Monuments) in Chunk NBTBuilding high-efficiency mob farms for Wither Skeletons, Witches, or Guardians requires knowing the exact coordinates of a structure's bounding box. Even if the physical blocks of a structure are destroyed or altered by terrain generation, the game uses invisible bounding boxes saved in the chunk data to dictate where structure-specific mobs can spawn. This guide teaches you how to inspect raw chunk NBT data using our browser-based tools to find those exact boundaries without your files ever leaving your computer.JavaAdvanced5 steps
Dimensions & structuresHow to View, Trim, or Remove Custom Datapack Dimensions in Your World SaveCustom datapacks and mods often generate their own dimensions, which can bloat your world save size or cause loading errors if the datapack is later removed. This guide shows you how to locate custom dimension namespaces in your Java Edition world folder, inspect their terrain using our browser-based World Map Viewer, and safely trim or delete their region data. Because our tools run locally in your browser, your world files are never uploaded to any server.JavaAdvanced5 steps
Dimensions & structuresHow to Plan Nether Hub Tunnels and Link Portals Using the World Map ViewerBuilding a Nether hub is the fastest way to travel long distances in Minecraft, because every block traveled in the Nether equals eight blocks in the Overworld. However, linking portals across dimensions often goes wrong when lava lakes, huge caverns, or math errors push portals out of alignment. By using our browser-based World Map Viewer, you can preview both dimensions, calculate exact 8:1 coordinates, and plan safe tunnel routes directly from your save files without uploading your world anywhere.Java & BedrockBeginner5 steps
Dimensions & structuresHow to Reset the Ender Dragon Fight and Regenerate End Exit Gateways in level.datSometimes the Ender Dragon fight in Minecraft Java Edition can glitch, leaving you without a dragon egg, a missing exit portal, or unable to generate the twenty outer End gateways. By editing the DragonFight compound inside your world's level.dat file, you can completely reset the battle state and replenish the gateway generation pool. This guide uses our browser-based level.dat Editor, which processes everything locally on your device so your files are never uploaded.JavaIntermediate5 steps
Dimensions & structuresHow to Reset Trial Chamber Vaults so Players Can Unlock Them AgainIn Minecraft Java Edition, Trial Chamber vaults are designed to only reward each player once by recording their unique ID inside the block itself. If you run a server or want to replay a Trial Chamber in single-player, you can reset these vaults without destroying or replacing the blocks. By using our browser-based NBT Editor, you can safely delete the player memory from specific vaults while keeping your world files completely private on your own computer.JavaAdvanced5 steps